|
|
Programming Your Yap Jack
Yap Jack
Yap Jack Plus
Yap Jack
You may check your current Internet Access number, User Name and Password by the following method:
Pick up the yap jack connected telephone
Turn on the yap jack
Press 57 on the keypad
Record the information played back from the menu. The Access number, User Name and Password are the third and fourth and fifth items on the menu.
Entering Your ISP Access Phone Number
Press: 5 on the keypad to enter the CONFIGURATION MENU
Press: 3 to enter your Internet access phone number (given to you by your ISP) Enter your ISP access phone number exactly as you would dial the number, followed by the # key
Press: 3 to save this number or press 1 if you wish to change it
Example:
To enter: 555-1234
Press: 555 1234 #
Press: 3 (to save value after you have been prompted)
Entering Your ISP User Name
Press: 5 on the keypad enter the CONFIGURATION MENU (if you are not yet in the MENU)
Press: 4 to enter the ISP USER NAME
You must press the appropriate number key (2 to 9) the amount of times necessary to access the required value. For example, to enter the letter “m”, press the number 6 key twice and then press # to select this value
• Press: 3 to save this number or press 1 if you wish to change it
Example:
To enter user name or password: YAPJACK@NET
Press: 999 99999 # 22 # 77 # 55555 # 22 # 2222 # 555 # 111111 # 666 # 333 # 88 # #
Press: 3 (to save value after you have been prompted)
Note: The Voice Prompts will guide you while you are programming the device
Entering Your ISP Password
Press 5 on the keypad enter the CONFIGURATION MENU (if you are not yet in the MENU)
To enter your password, follow the same procedures used to enter your Internet access user name.
Users with Call Waiting
If you subscribe to call waiting, it must be blocked during Internet telephone calls. Because Internet access is obtained through a modem inside the Yap Jack, call waiting will not work as it does on a regular telephone call.
The feature to block call waiting must be activated.
To block call waiting, program the call wait block code obtained from your telephone company IN FRONT of the ISP access phone number. In the USA and Jamaica, the call block code is *70.
Example - To enter: *70 555-1234
Press: * 70 *** 555 1234 # (Note: You will hear the Voice Prompt announce “comma” 70 “comma” comma” comma” 555 1234)
Press: 3 (to save value after you have been prompted)
Call waiting will be disabled for the duration of any Yap Jack call that you make and restored for regular telephone calls after you hang up.
Yap Jack Plus
To enter your account information:
1. When Yap Jack Plus * Ready * is
displayed on the LCD, press the Menu/Exit button.
2. When >Account Config displays, select it by pressing the OK button.
3. Select >Account Number by pressing the OK button. The Account Number entry field displays.
4. Using your telephone keypad, enter your Yap Jack Plus account number.
5. To save your entry, press the OK button.
To enter your PIN:
6. Select PIN by pressing the down button and then pressing OK. The PIN entry field displays.
7. Using your telephone keypad, enter the PIN associated with your account number.
8. To save your entry, press the OK button.
9. Press the Menu/Exit button to return to the main menu.
To enter your ISP information:
10. Select >ISP Config by pressing the down button and then pressing OK.
11. When >ISP Phone Num. is displayed on the LCD, select it by pressing the OK button. The ISP Phone Num. entry field displays.
12. Pick up your telephone handset, and then using the keypad on your handset, enter your ISP’s access telephone number. Don’t forget to add any necessary prefixes, such as 9 (dependent on your phone system or local calling requirements), before the telephone number. All information entered on your telephone keypad is displayed on the Yap Jack Plus LCD screen. Please check the LCD as you enter information.
13. To save your entry, press the OK button.
14. Select ISP User Name by pressing the down button and then pressing OK. The ISP User Name entry field displays.
15. Using your telephone keypad, enter the username for your ISP account. To find out how to enter the complete set of letters and symbols in your Yap Jack Plus, use the telephone keypad map located in Chapter 6.
You must press the appropriate number key (2 to 9) the amount of times necessary to access the required value. For example, to enter the letter “m”, press the number 6 key twice. Press the * key on your telephone keypad to back up and delete any unwanted character entered.
16. To save your entry, press the OK button.
17. Select ISP Password by pressing the down button and then pressing OK. The ISP Password entry field displays.
18. Using your telephone keypad, enter your password.
19. To save your entry, press the OK button.
20. Press the Menu/Exit button twice to exit out and hang up your telephone handset. Yap Jack Plus * Ready * displays on the LCD.
Disabling Call Waiting
If you do have call waiting set up, then you must configure your Yap Jack Plus to block call waiting every time you place a call to your ISP. Otherwise, if a call comes in on the line, your Yap Jack Plus call will disconnect. To disable call waiting:
1. When Yap Jack Plus * Ready * is displayed on the LCD, press the Menu/Exit button.
2. Press the down button until you see Extended Config on the LCD, and then select it by pressing the OK button.
3. Press the down (.) button until you see Call Waiting on the LCD, and then select it by pressing the OK button. The Call Waiting entry field displays.
4. Select In Use by pressing the up button.
5. To save your entry, press the OK button.
6. Now, you must enter the block code to disable call waiting. Press the down button until you see C-W Block Code on the LCD, and then select it by pressing the OK button. The C-W Block Code entry field displays.
7. Using your telephone keypad, enter the code to block the call-waiting feature. If you don’t know the code, contact your local telephone company. In the USA and Jamaica, the call block code is *70.
To enter the * sign, press the 1 key five times.
8. To save your entry, press the OK button.
|
